Uses of Interface
org.deegree.geometry.Geometry

Packages that use Geometry

org.deegree.geometry
org.deegree.geometry.composite
org.deegree.geometry.io
org.deegree.geometry.linearization
org.deegree.geometry.multi
org.deegree.geometry.primitive
org.deegree.geometry.refs
org.deegree.geometry.standard
org.deegree.geometry.standard.composite
org.deegree.geometry.standard.multi
org.deegree.geometry.standard.primitive
org.deegree.geometry.utils
org.deegree.geometry.validation

Uses of Geometry in org.deegree.geometry

Subinterfaces of Geometry in org.deegree.geometry

interface

Envelope Axis-parallel bounding box.

Methods in org.deegree.geometry with type parameters of type Geometry

<T extends Geometry> T	GeometryTransformer.transform(T geo) transforms the coordinates of a deegree geometry to the target coordinate reference system.
<T extends Geometry> T	GeometryTransformer.transform(T geo, ICRS sourceCRS) transforms the coordinates of a deegree geometry to the target coordinate reference system.
<T extends Geometry> T	GeometryTransformer.transform(T geom, ICRS sourceCRS, boolean testValidArea, List<Transformation> toBeUsedTransformations) transforms the coordinates of a deegree geometry to the target coordinate reference system.

Methods in org.deegree.geometry that return Geometry

static Geometry	Geometries.copyDeep(Geometry geom) Creates a deep copy of the given Geometry object.
Geometry	Geometry.getBuffer(org.deegree.commons.uom.Measure distance) Return a new Geometry that contains all points with a distance from this Geometry that is less than or equal to the specified distance.
Geometry	Geometry.getConvexHull() Returns the convex hull of the geometry.
Geometry	Geometry.getDifference(Geometry geometry) Returns the set-theoretic difference of this and the passed Geometry.
Geometry	Geometry.getIntersection(Geometry geometry) Returns the set-theoretic intersection of this and the passed Geometry.
Geometry	Geometry.getUnion(Geometry geometry) Returns the set-theoretic union of this and the passed Geometry.
Geometry	GeometryInspector.inspect(Geometry geom) Invokes the inspection of the given Geometry.
protected Geometry	SimpleGeometryFactory.inspect(Geometry geom)
Geometry	SFSProfiler.simplify(GeometricPrimitive geometry) Simplifies the given GeometricPrimitive.
Geometry	SFSProfiler.simplify(Geometry geometry) Simplifies the given Geometry.
Geometry	SFSProfiler.simplify(Surface geometry) Simplifies the given Surface.
Geometry	GeometryTransformer.transform(Geometry geo, boolean testValidDomain) transforms the coordinates of a deegree geometry to the target coordinate reference system.
Geometry	GeometryTransformer.transform(Geometry geo, String sourceCRS) transforms the coordinates of a deegree geometry to the target coordinate reference system.

Methods in org.deegree.geometry that return types with arguments of type Geometry

MultiGeometry<Geometry>

SimpleGeometryFactory.createMultiGeometry(String id, ICRS crs, List<Geometry> members) Creates an untyped multi geometry from a list of Geometrys.

Methods in org.deegree.geometry with parameters of type Geometry

boolean	Geometry.contains(Geometry geometry) Tests whether this geometry contains the specified geometry.
static Geometry	Geometries.copyDeep(Geometry geom) Creates a deep copy of the given Geometry object.
boolean	Geometry.crosses(Geometry geometry) Tests whether this geometry crosses the specified geometry.
boolean	Geometry.equals(Geometry geometry) Tests whether this geometry is equal to the specified geometry.
Geometry	Geometry.getDifference(Geometry geometry) Returns the set-theoretic difference of this and the passed Geometry.
org.deegree.commons.uom.Measure	Geometry.getDistance(Geometry geometry, org.deegree.commons.uom.Unit requestedUnits) Returns the minimum distance between this and the specified geometry.
Geometry	Geometry.getIntersection(Geometry geometry) Returns the set-theoretic intersection of this and the passed Geometry.
Geometry	Geometry.getUnion(Geometry geometry) Returns the set-theoretic union of this and the passed Geometry.
Geometry	GeometryInspector.inspect(Geometry geom) Invokes the inspection of the given Geometry.
protected Geometry	SimpleGeometryFactory.inspect(Geometry geom)
boolean	Geometry.intersects(Geometry geometry) Tests whether this geometry intersects the specified geometry.
boolean	Geometry.isBeyond(Geometry geometry, org.deegree.commons.uom.Measure distance) Tests whether this geometry is beyond a specified distance of a second geometry.
boolean	Geometry.isDisjoint(Geometry geometry) Tests whether this geometry is disjoint from the specified geometry.
boolean	Geometry.isWithin(Geometry geometry) tests whether the value of a geometric is topological located within this geometry.
boolean	Geometry.isWithinDistance(Geometry geometry, org.deegree.commons.uom.Measure distance) Tests whether this geometry is within a specified distance of a second geometry.
boolean	Geometry.overlaps(Geometry geometry) Tests whether this geometry overlaps the specified geometry.
Geometry	SFSProfiler.simplify(Geometry geometry) Simplifies the given Geometry.
boolean	Geometry.touches(Geometry geometry) Tests whether this geometry touches the specified geometry.
Geometry	GeometryTransformer.transform(Geometry geo, boolean testValidDomain) transforms the coordinates of a deegree geometry to the target coordinate reference system.
Geometry	GeometryTransformer.transform(Geometry geo, String sourceCRS) transforms the coordinates of a deegree geometry to the target coordinate reference system.

Method parameters in org.deegree.geometry with type arguments of type Geometry

MultiGeometry<Geometry>

SimpleGeometryFactory.createMultiGeometry(String id, ICRS crs, List<Geometry> members) Creates an untyped multi geometry from a list of Geometrys.

Uses of Geometry in org.deegree.geometry.composite

Subinterfaces of Geometry in org.deegree.geometry.composite

interface	CompositeCurve A CompositeCurve is a geometry with the same topological properties as a (primitive) Curve.
interface	CompositeGeometry<T extends GeometricPrimitive> A CompositeGeometry is a geometric complex with underlying core geometries that are (as a whole) isomorphic to a geometry primitive.
interface	CompositeSolid CompositeSolid is a geometry type with the same geometric properties as the (primitive) Solid type.
interface	CompositeSurface CompositeSurface is a geometry type with the same geometric properties as the (primitive) Surface type.

Uses of Geometry in org.deegree.geometry.io

Methods in org.deegree.geometry.io that return Geometry

static Geometry	WKBReader.read(byte[] wkb, ICRS crs)
static Geometry	WKBReader.read(InputStream is, ICRS crs)
Geometry	WKTReader.read(Reader reader)
Geometry	WKTReader.read(String wkt)

Methods in org.deegree.geometry.io with parameters of type Geometry

static String	WKTWriter.write(Geometry geom) Export the given geometry to wkt, without using any WKTWriter.WKTFlags.
static byte[]	WKBWriter.write(Geometry geom)
static void	WKBWriter.write(Geometry geom, OutputStream os)
static void	WKTWriter.write(Geometry geom, Writer writer) Export the given geometry to wkt, without using any WKTWriter.WKTFlags.
void	WKTWriter.writeGeometry(Geometry geometry, Writer writer)

Method parameters in org.deegree.geometry.io with type arguments of type Geometry

void	WKTWriter.writeMultiGeometry(MultiGeometry<? extends Geometry> geometry, Writer writer) Writes a multiGeometry.
void	WKTWriter.writeMultiGeometryGeometry(MultiGeometry<? extends Geometry> geometry, Writer writer) Writes the multiGeometry.

Uses of Geometry in org.deegree.geometry.linearization

Methods in org.deegree.geometry.linearization with type parameters of type Geometry

<T extends Geometry> T

GeometryLinearizer.linearize(T geom, LinearizationCriterion crit) Returns a linearized version of the given Geometry.

Uses of Geometry in org.deegree.geometry.multi

Classes in org.deegree.geometry.multi with type parameters of type Geometry

interface

MultiGeometry<T extends Geometry> Basic aggregation type for Geometry objects.

Subinterfaces of Geometry in org.deegree.geometry.multi

interface	MultiCurve<T extends Curve> Specialised aggregation type for Curve objects.
interface	MultiGeometry<T extends Geometry> Basic aggregation type for Geometry objects.
interface	MultiLineString Specialised aggregation type for LineString objects.
interface	MultiPoint Specialised aggregation type for Point objects.
interface	MultiPolygon Specialised aggregation type for Polygon objects.
interface	MultiSolid Specialised aggregation type for Solid objects.
interface	MultiSurface<T extends Surface> Specialised aggregation type for Surface objects.

Uses of Geometry in org.deegree.geometry.primitive

Subinterfaces of Geometry in org.deegree.geometry.primitive

interface	Curve Curve instances are 1D-geometries that consist of a number of curve segments.
interface	GeometricPrimitive A GeometricPrimitive is a contigous geometry with single dimensionality.
interface	LinearRing TODO add documentation here
interface	LineString The most common case of a Curve: consist of just one curve segment with linear interpolation between the control points.
interface	OrientableCurve An OrientableCurve consists of a wrapped base Curve and an additional orientation.
interface	OrientableSurface An OrientableSurface consists of a wrapped base Surface and an additional orientation.
interface	Point 0-dimensional primitive.
interface	Polygon A Surface that consists of one single planar patch (a PolygonPatch).
interface	PolyhedralSurface A Surface that consists only of PolygonPatch patches.
interface	Ring A Ring is a composition of Curves that forms a closed loop.
interface	Solid Solid instances are 3D-geometries that ...
interface	Surface Surface instances are 2D-geometries that consist of an arbitrary number of surface patches which are not necessarily planar.
interface	Tin A TriangulatedSurface that uses the Delaunay algorithm or a similar algorithm complemented with consideration of breaklines, stoplines, and maximum length of triangle sides.
interface	TriangulatedSurface A Surface that consists only of Triangle patches.

Uses of Geometry in org.deegree.geometry.refs

Classes in org.deegree.geometry.refs with type parameters of type Geometry

class

GeometryReference<T extends Geometry> Represents a reference to the GML representation of a geometry, which is usually expressed using an xlink:href attribute in GML (may be document-local or remote).

Classes in org.deegree.geometry.refs that implement Geometry

class	CurveReference<T extends Curve> The class TODO add class documentation here.
class	GeometricPrimitiveReference<T extends GeometricPrimitive> The class TODO add class documentation here.
class	GeometryReference<T extends Geometry> Represents a reference to the GML representation of a geometry, which is usually expressed using an xlink:href attribute in GML (may be document-local or remote).
class	LineStringReference The class TODO add class documentation here.
class	PointReference The class TODO add class documentation here.
class	PolygonReference The class TODO add class documentation here.
class	SolidReference<T extends Solid> The class TODO add class documentation here.
class	SurfaceReference<T extends Surface> The class TODO add class documentation here.

Methods in org.deegree.geometry.refs that return Geometry

Geometry	GeometryReference.getBuffer(org.deegree.commons.uom.Measure distance)
Geometry	GeometryReference.getConvexHull()
Geometry	GeometryReference.getDifference(Geometry geometry)
Geometry	GeometryReference.getIntersection(Geometry geometry)
Geometry	GeometryReference.getUnion(Geometry geometry)

Methods in org.deegree.geometry.refs with parameters of type Geometry

boolean	GeometryReference.contains(Geometry geometry)
boolean	GeometryReference.crosses(Geometry geometry)
boolean	GeometryReference.equals(Geometry geometry)
Geometry	GeometryReference.getDifference(Geometry geometry)
org.deegree.commons.uom.Measure	GeometryReference.getDistance(Geometry geometry, org.deegree.commons.uom.Unit requestedUnits)
Geometry	GeometryReference.getIntersection(Geometry geometry)
Geometry	GeometryReference.getUnion(Geometry geometry)
boolean	GeometryReference.intersects(Geometry geometry)
boolean	GeometryReference.isBeyond(Geometry geometry, org.deegree.commons.uom.Measure distance)
boolean	GeometryReference.isDisjoint(Geometry geometry)
boolean	GeometryReference.isWithin(Geometry geometry)
boolean	GeometryReference.isWithinDistance(Geometry geometry, org.deegree.commons.uom.Measure distance)
boolean	GeometryReference.overlaps(Geometry geometry)
boolean	GeometryReference.touches(Geometry geometry)

Uses of Geometry in org.deegree.geometry.standard

Classes in org.deegree.geometry.standard that implement Geometry

class	AbstractDefaultGeometry Abstract base class for the default Geometry implementation.
class	DefaultEnvelope Default implementation of Envelope.

Methods in org.deegree.geometry.standard that return Geometry

Geometry	AbstractDefaultGeometry.getBuffer(org.deegree.commons.uom.Measure distance)
Geometry	AbstractDefaultGeometry.getConvexHull()
Geometry	AbstractDefaultGeometry.getDifference(Geometry geometry)
Geometry	AbstractDefaultGeometry.getIntersection(Geometry geometry)
Geometry	AbstractDefaultGeometry.getUnion(Geometry geometry)

Methods in org.deegree.geometry.standard with parameters of type Geometry

boolean	AbstractDefaultGeometry.contains(Geometry geometry)
static JTSGeometryPair	JTSGeometryPair.createCompatiblePair(AbstractDefaultGeometry geom1, Geometry geom2) Creates a "compatible" pair of JTS geometries from an AbstractDefaultGeometry and a second Geometry instance.
boolean	AbstractDefaultGeometry.crosses(Geometry geometry)
boolean	AbstractDefaultGeometry.equals(Geometry geometry)
protected static AbstractDefaultGeometry	AbstractDefaultGeometry.getAsDefaultGeometry(Geometry geometry)
Geometry	AbstractDefaultGeometry.getDifference(Geometry geometry)
org.deegree.commons.uom.Measure	AbstractDefaultGeometry.getDistance(Geometry geometry, org.deegree.commons.uom.Unit requestedUnit)
Geometry	AbstractDefaultGeometry.getIntersection(Geometry geometry)
Geometry	AbstractDefaultGeometry.getUnion(Geometry geometry)
boolean	AbstractDefaultGeometry.intersects(Geometry geometry)
boolean	DefaultEnvelope.intersects(Geometry other)
boolean	AbstractDefaultGeometry.isBeyond(Geometry geometry, org.deegree.commons.uom.Measure distance)
boolean	AbstractDefaultGeometry.isDisjoint(Geometry geometry)
boolean	AbstractDefaultGeometry.isWithin(Geometry geometry)
boolean	AbstractDefaultGeometry.isWithinDistance(Geometry geometry, org.deegree.commons.uom.Measure distance)
boolean	AbstractDefaultGeometry.overlaps(Geometry geometry)
boolean	AbstractDefaultGeometry.touches(Geometry geometry)

Uses of Geometry in org.deegree.geometry.standard.composite

Classes in org.deegree.geometry.standard.composite that implement Geometry

class	DefaultCompositeCurve Default implementation of CompositeCurve.
class	DefaultCompositeGeometry Default implementation of CompositeGeometry.
class	DefaultCompositeSolid Default implementation of CompositeSolid.
class	DefaultCompositeSurface Default implementation of CompositeSurface.

Uses of Geometry in org.deegree.geometry.standard.multi

Classes in org.deegree.geometry.standard.multi with type parameters of type Geometry

class

DefaultMultiGeometry<T extends Geometry> Default implementation of MultiGeometry.

Classes in org.deegree.geometry.standard.multi that implement Geometry

class	DefaultMultiCurve Default implementation of MultiCurve.
class	DefaultMultiGeometry<T extends Geometry> Default implementation of MultiGeometry.
class	DefaultMultiLineString Default implementation of MultiLineString.
class	DefaultMultiPoint Default implementation of MultiPoint.
class	DefaultMultiPolygon Default implementation of MultiPolygon.
class	DefaultMultiSolid Default implementation of MultiSolid.
class	DefaultMultiSurface Default implementation of MultiSurface.

Uses of Geometry in org.deegree.geometry.standard.primitive

Classes in org.deegree.geometry.standard.primitive that implement Geometry

class	DefaultCurve Default implementation of Curve.
class	DefaultLinearRing Default implementation of Ring.
class	DefaultLineString Default implementation of LineString.
class	DefaultOrientableCurve Default implementation of OrientableCurve.
class	DefaultOrientableSurface Default implementation of OrientableSurface.
class	DefaultPoint Default implementation of Point.
class	DefaultPolygon Default implementation of Polygon.
class	DefaultPolyhedralSurface Default implementation of PolyhedralSurface.
class	DefaultRing Default implementation of Ring.
class	DefaultSolid Default implementation of Solid.
class	DefaultSurface Default implementation of Surface.
class	DefaultTin Default implementation of Tin.
class	DefaultTriangulatedSurface Default implementation of TriangulatedSurface.

Methods in org.deegree.geometry.standard.primitive that return Geometry

Geometry	DefaultOrientableCurve.getBuffer(org.deegree.commons.uom.Measure distance)
Geometry	DefaultOrientableSurface.getBuffer(org.deegree.commons.uom.Measure distance)
Geometry	DefaultOrientableCurve.getConvexHull()
Geometry	DefaultOrientableSurface.getConvexHull()
Geometry	DefaultOrientableCurve.getDifference(Geometry geometry)
Geometry	DefaultOrientableSurface.getDifference(Geometry geometry)
Geometry	DefaultOrientableCurve.getIntersection(Geometry geometry)
Geometry	DefaultOrientableSurface.getIntersection(Geometry geometry)
Geometry	DefaultOrientableCurve.getUnion(Geometry geometry)
Geometry	DefaultOrientableSurface.getUnion(Geometry geometry)

Methods in org.deegree.geometry.standard.primitive with parameters of type Geometry

boolean	DefaultOrientableCurve.contains(Geometry geometry)
boolean	DefaultOrientableSurface.contains(Geometry geometry)
boolean	DefaultOrientableCurve.crosses(Geometry geometry)
boolean	DefaultOrientableSurface.crosses(Geometry geometry)
boolean	DefaultOrientableCurve.equals(Geometry geometry)
boolean	DefaultOrientableSurface.equals(Geometry geometry)
boolean	DefaultPoint.equals(Geometry geometry)
Geometry	DefaultOrientableCurve.getDifference(Geometry geometry)
Geometry	DefaultOrientableSurface.getDifference(Geometry geometry)
org.deegree.commons.uom.Measure	DefaultOrientableCurve.getDistance(Geometry geometry, org.deegree.commons.uom.Unit requestedUnit)
org.deegree.commons.uom.Measure	DefaultOrientableSurface.getDistance(Geometry geometry, org.deegree.commons.uom.Unit requestedUnit)
Geometry	DefaultOrientableCurve.getIntersection(Geometry geometry)
Geometry	DefaultOrientableSurface.getIntersection(Geometry geometry)
Geometry	DefaultOrientableCurve.getUnion(Geometry geometry)
Geometry	DefaultOrientableSurface.getUnion(Geometry geometry)
boolean	DefaultOrientableCurve.intersects(Geometry geometry)
boolean	DefaultOrientableSurface.intersects(Geometry geometry)
boolean	DefaultOrientableCurve.isBeyond(Geometry geometry, org.deegree.commons.uom.Measure distance)
boolean	DefaultOrientableSurface.isBeyond(Geometry geometry, org.deegree.commons.uom.Measure distance)
boolean	DefaultOrientableCurve.isDisjoint(Geometry geometry)
boolean	DefaultOrientableSurface.isDisjoint(Geometry geometry)
boolean	DefaultOrientableCurve.isWithin(Geometry geometry)
boolean	DefaultOrientableSurface.isWithin(Geometry geometry)
boolean	DefaultOrientableCurve.isWithinDistance(Geometry geometry, org.deegree.commons.uom.Measure distance)
boolean	DefaultOrientableSurface.isWithinDistance(Geometry geometry, org.deegree.commons.uom.Measure distance)
boolean	DefaultOrientableCurve.overlaps(Geometry geometry)
boolean	DefaultOrientableSurface.overlaps(Geometry geometry)
boolean	DefaultOrientableCurve.touches(Geometry geometry)
boolean	DefaultOrientableSurface.touches(Geometry geometry)

Uses of Geometry in org.deegree.geometry.utils

Methods in org.deegree.geometry.utils that return Geometry

static Geometry

GeometryUtils.move(Geometry geom, double offx, double offy) Moves the coordinates of a geometry.

Methods in org.deegree.geometry.utils with parameters of type Geometry

static Geometry

GeometryUtils.move(Geometry geom, double offx, double offy) Moves the coordinates of a geometry.

Uses of Geometry in org.deegree.geometry.validation

Methods in org.deegree.geometry.validation that return Geometry

Geometry

CoordinateValidityInspector.inspect(Geometry geom)

Methods in org.deegree.geometry.validation with parameters of type Geometry

Geometry	CoordinateValidityInspector.inspect(Geometry geom)
boolean	GeometryValidator.validateGeometry(Geometry geom) Performs a topological validation of the given Geometry.