Uses of Interface
org.deegree.geometry.primitive.Point

Packages that use Point

org.deegree.geometry
org.deegree.geometry.io
org.deegree.geometry.linearization
org.deegree.geometry.points
org.deegree.geometry.primitive
org.deegree.geometry.primitive.patches
org.deegree.geometry.primitive.segments
org.deegree.geometry.refs
org.deegree.geometry.standard
org.deegree.geometry.standard.composite
org.deegree.geometry.standard.curvesegments
org.deegree.geometry.standard.multi
org.deegree.geometry.standard.points
org.deegree.geometry.standard.primitive
org.deegree.geometry.standard.surfacepatches
org.deegree.geometry.validation
org.deegree.gml.geometry
org.deegree.gml.geometry.validation
org.deegree.observation.model
org.deegree.protocol.ows

Uses of Point in org.deegree.geometry

Methods in org.deegree.geometry that return Point

Point	SimpleGeometryFactory.createPoint(String id, double[] coordinates, ICRS crs) Creates a Point with an arbitrary number of coordinates.
Point	SimpleGeometryFactory.createPoint(String id, double x, double y, double z, ICRS crs) Creates a Point in 3D space.
Point	SimpleGeometryFactory.createPoint(String id, double x, double y, ICRS crs) Creates a Point in 2D space.
Point	Geometry.getCentroid() Returns the centroid of the geometry.
Point	Envelope.getMax() Returns the envelope's maximum coordinate
Point	Envelope.getMin() Returns the envelope's minimum coordinate.
Point	SFSProfiler.simplify(Point geometry) Simplifies the given Point.

Methods in org.deegree.geometry with parameters of type Point

Arc	GeometryFactory.createArc(Point p1, Point p2, Point p3) Creates an Arc curve segment.
ArcByBulge	GeometryFactory.createArcByBulge(Point p1, Point p2, double bulge, Point normal) Creates an ArcByBulge curve segment.
ArcByCenterPoint	GeometryFactory.createArcByCenterPoint(Point midPoint, Length radius, Angle startAngle, Angle endAngle) Creates an ArcByCenterPoint curve segment.
Circle	GeometryFactory.createCircle(Point p1, Point p2, Point p3) Creates a Circle curve segment.
CircleByCenterPoint	GeometryFactory.createCircleByCenterPoint(Point midPoint, Length radius, Angle startAngle) Creates an CircleByCenterPoint curve segment.
CubicSpline	GeometryFactory.createCubicSpline(Points points, Point vectorAtStart, Point vectorAtEnd) Creates a Clothoid curve segment.
Geodesic	GeometryFactory.createGeodesic(Point p1, Point p2) Creates a Geodesic curve segment.
OffsetCurve	GeometryFactory.createOffsetCurve(Curve baseCurve, Point direction, Length distance) Creates an OffsetCurve curve segment.
Point	SFSProfiler.simplify(Point geometry) Simplifies the given Point.

Method parameters in org.deegree.geometry with type arguments of type Point

MultiPoint	SimpleGeometryFactory.createMultiPoint(String id, ICRS crs, List<Point> members) Creates a MultiPoint from a list of passed Points.
Points	SimpleGeometryFactory.createPoints(List<Point> points) Creates a Points object from the given list of Point instances.

Uses of Point in org.deegree.geometry.io

Methods in org.deegree.geometry.io with parameters of type Point

void	WKTWriter.writePoint(Point geometry, Writer writer) Writes the POINT

Uses of Point in org.deegree.geometry.linearization

Methods in org.deegree.geometry.linearization with parameters of type Point

static boolean

CurveLinearizer.areCollinear(Point p0, Point p1, Point p2) Tests if the given three points are collinear.

Uses of Point in org.deegree.geometry.points

Methods in org.deegree.geometry.points that return Point

Point	Points.get(int i) Returns the Point at the specified position.
Point	Points.getEndPoint() Returns the last point of the sequence.
Point	Points.getStartPoint() Returns the first point of the sequence.

Uses of Point in org.deegree.geometry.primitive

Methods in org.deegree.geometry.primitive that return Point

Point	Curve.getEndPoint() Returns the end point of the curve.
Point	Curve.getStartPoint() Returns the start point of the curve.

Methods in org.deegree.geometry.primitive that return types with arguments of type Point

Pair<Point,Point>	Curve.getBoundary() The boundary of a curve is the set of points at either end of the curve.
Pair<Point,Point>	Curve.getBoundary() The boundary of a curve is the set of points at either end of the curve.

Uses of Point in org.deegree.geometry.primitive.patches

Methods in org.deegree.geometry.primitive.patches that return Point

Point	Triangle.getPoint1() Returns the first of the three control points.
Point	Rectangle.getPoint1() Returns the first of the four control points.
Point	Triangle.getPoint2() Returns the second of the three control points.
Point	Rectangle.getPoint2() Returns the second of the four control points.
Point	Triangle.getPoint3() Returns the last of the three control points.
Point	Rectangle.getPoint3() Returns the third of the four control points.
Point	Rectangle.getPoint4() Returns the last of the four control points.

Uses of Point in org.deegree.geometry.primitive.segments

Methods in org.deegree.geometry.primitive.segments that return Point

Point	OffsetCurve.getDirection() Returns the direction of the offset from the base Curve.
Point	CurveSegment.getEndPoint() Returns the end point of the segment.
Point	Circle.getMidPoint() Returns the mid-point of the circle.
Point	ArcByCenterPoint.getMidPoint() Returns the center point of the arc.
Point	ArcByBulge.getNormal() Returns the single normal vector for the bulge.
Point	Geodesic.getPoint1() Returns the first control point.
Point	ArcByBulge.getPoint1() Returns the first control point.
Point	Arc.getPoint1() Returns the first of the three control points.
Point	Geodesic.getPoint2() Returns the second control point.
Point	ArcByBulge.getPoint2() Returns the second control point.
Point	Arc.getPoint2() Returns the second of the three control points.
Point	Arc.getPoint3() Returns the last of the three control points.
Point	CurveSegment.getStartPoint() Returns the start point of the segment.
Point	CubicSpline.getVectorAtEnd() Returns the unit tangent vector at the end point of the spline.
Point	CubicSpline.getVectorAtStart() Returns the unit tangent vector at the start point of the spline.

Uses of Point in org.deegree.geometry.refs

Classes in org.deegree.geometry.refs that implement Point

class

PointReference The class TODO add class documentation here.

Methods in org.deegree.geometry.refs that return Point

Point	SurfaceReference.getCentroid()
Point	GeometryReference.getCentroid()
Point	CurveReference.getEndPoint()
Point	CurveReference.getStartPoint()

Methods in org.deegree.geometry.refs that return types with arguments of type Point

Pair<Point,Point>	CurveReference.getBoundary()
Pair<Point,Point>	CurveReference.getBoundary()

Uses of Point in org.deegree.geometry.standard

Methods in org.deegree.geometry.standard that return Point

Point	AbstractDefaultGeometry.getCentroid()
Point	DefaultEnvelope.getCentroid()
Point	DefaultEnvelope.getMax()
Point	DefaultEnvelope.getMin()

Constructors in org.deegree.geometry.standard with parameters of type Point

DefaultEnvelope(Point min, Point max)
Creates a new DefaultEnvelope instance with no id, crs and precisionmodel.

DefaultEnvelope(String id, ICRS crs, PrecisionModel pm, Point min, Point max)
Creates a new DefaultEnvelope instance from the given parameters.

Uses of Point in org.deegree.geometry.standard.composite

Methods in org.deegree.geometry.standard.composite that return Point

Point	DefaultCompositeSurface.getCentroid()
Point	DefaultCompositeCurve.getEndPoint()
Point	DefaultCompositeCurve.getStartPoint()

Methods in org.deegree.geometry.standard.composite that return types with arguments of type Point

Pair<Point,Point>	DefaultCompositeCurve.getBoundary()
Pair<Point,Point>	DefaultCompositeCurve.getBoundary()

Uses of Point in org.deegree.geometry.standard.curvesegments

Methods in org.deegree.geometry.standard.curvesegments that return Point

Point	DefaultOffsetCurve.getDirection()
Point	DefaultArcString.getEndPoint()
Point	DefaultOffsetCurve.getEndPoint()
Point	DefaultArc.getEndPoint()
Point	DefaultGeodesic.getEndPoint()
Point	DefaultArcStringByBulge.getEndPoint()
Point	DefaultClothoid.getEndPoint()
Point	DefaultCircle.getEndPoint()
Point	DefaultCubicSpline.getEndPoint()
Point	DefaultGeodesicString.getEndPoint()
Point	DefaultArcByBulge.getEndPoint()
Point	DefaultArcByCenterPoint.getEndPoint()
Point	DefaultLineStringSegment.getEndPoint()
Point	DefaultBezier.getEndPoint()
Point	DefaultBSpline.getEndPoint()
Point	AffinePlacement.getLocation() Returns the target of the parameter space origin.
Point	DefaultCircle.getMidPoint()
Point	DefaultArcByCenterPoint.getMidPoint()
Point	DefaultArcByBulge.getNormal()
Point	DefaultArc.getPoint1()
Point	DefaultGeodesic.getPoint1()
Point	DefaultArcByBulge.getPoint1()
Point	DefaultArc.getPoint2()
Point	DefaultGeodesic.getPoint2()
Point	DefaultArcByBulge.getPoint2()
Point	DefaultArc.getPoint3()
Point	DefaultArcString.getStartPoint()
Point	DefaultOffsetCurve.getStartPoint()
Point	DefaultArc.getStartPoint()
Point	DefaultGeodesic.getStartPoint()
Point	DefaultArcStringByBulge.getStartPoint()
Point	DefaultClothoid.getStartPoint()
Point	DefaultCubicSpline.getStartPoint()
Point	DefaultGeodesicString.getStartPoint()
Point	DefaultArcByBulge.getStartPoint()
Point	DefaultArcByCenterPoint.getStartPoint()
Point	DefaultLineStringSegment.getStartPoint()
Point	DefaultBezier.getStartPoint()
Point	DefaultBSpline.getStartPoint()
Point	DefaultCubicSpline.getVectorAtEnd()
Point	DefaultCubicSpline.getVectorAtStart()

Constructors in org.deegree.geometry.standard.curvesegments with parameters of type Point

AffinePlacement(Point location, Points refDirections, int inDimension, int outDimension)
Creates a new AffinePlacement from the given parameters.

DefaultArc(Point p1, Point p2, Point p3)
Creates a new DefaultArc instance from the given parameters.

DefaultArcByBulge(Point p1, Point p2, double bulge, Point normal)
Creates a new DefaultArcByBulge instance from the given parameters.

DefaultArcByCenterPoint(Point midPoint, Measure radius, Angle startAngle, Angle endAngle)
Creates a new DefaultArcByCenterPoint instance from the given parameters.

DefaultCircle(Point p1, Point p2, Point p3)
Creates a new DefaultCircle instance from the given parameters.

DefaultCircleByCenterPoint(Point midPoint, Length radius, Angle startAngle)
Creates a new DefaultCircleByCenterPoint instance from the given parameters.

DefaultCubicSpline(Points points, Point vectorAtStart, Point vectorAtEnd)
Creates a new DefaultCubicSpline instance from the given parameters.

DefaultGeodesic(Point p1, Point p2)
Creates a new DefaultGeodesic instance from the given parameters.

DefaultOffsetCurve(Curve baseCurve, Point direction, Measure distance)
Creates a new DefaultOffsetCurve instance from the given parameters.

Uses of Point in org.deegree.geometry.standard.multi

Constructor parameters in org.deegree.geometry.standard.multi with type arguments of type Point

DefaultMultiPoint(String id, ICRS crs, PrecisionModel pm, List<Point> members)
Creates a new DefaultMultiPoint from the given parameters.

Uses of Point in org.deegree.geometry.standard.points

Fields in org.deegree.geometry.standard.points with type parameters of type Point

protected List<Point>

PointsList.points

Methods in org.deegree.geometry.standard.points that return Point

Point	JTSPoints.get(int i) Provides acccess to an arbitrary Point in the sequence (expensive!).
Point	PointsList.get(int i)
Point	PointsSubsequence.get(int i)
Point	PointsPoints.get(int i)
Point	PointsArray.get(int i)
Point	PackedPoints.get(int i) Provides acccess to an arbitrary Point in the sequence (expensive!).
Point	JTSPoints.getEndPoint()
Point	PointsList.getEndPoint()
Point	PointsSubsequence.getEndPoint()
Point	PointsPoints.getEndPoint()
Point	PointsArray.getEndPoint()
Point	PackedPoints.getEndPoint()
Point	JTSPoints.getStartPoint()
Point	PointsList.getStartPoint()
Point	PointsSubsequence.getStartPoint()
Point	PointsPoints.getStartPoint()
Point	PointsArray.getStartPoint()
Point	PackedPoints.getStartPoint()

Methods in org.deegree.geometry.standard.points that return types with arguments of type Point

Iterator<Point>	JTSPoints.iterator()
Iterator<Point>	PointsList.iterator()
Iterator<Point>	PointsSubsequence.iterator()
Iterator<Point>	PointsPoints.iterator()
Iterator<Point>	PointsArray.iterator()
Iterator<Point>	PackedPoints.iterator()

Constructors in org.deegree.geometry.standard.points with parameters of type Point

PointsArray(Point... points)
Creates a new PointsArray instance based on the given array.

Constructor parameters in org.deegree.geometry.standard.points with type arguments of type Point

PointsList(List<Point> points)
Creates a new PointsList instance based on the given list.

Uses of Point in org.deegree.geometry.standard.primitive

Classes in org.deegree.geometry.standard.primitive that implement Point

class

DefaultPoint Default implementation of Point.

Methods in org.deegree.geometry.standard.primitive that return Point

Point	DefaultOrientableSurface.getCentroid()
Point	DefaultPolyhedralSurface.getCentroid()
Point	DefaultTin.getCentroid()
Point	DefaultTriangulatedSurface.getCentroid()
Point	DefaultOrientableCurve.getEndPoint()
Point	DefaultCurve.getEndPoint()
Point	DefaultRing.getEndPoint()
Point	DefaultSurface.getInteriorPoint()
Point	DefaultOrientableCurve.getStartPoint()
Point	DefaultCurve.getStartPoint()
Point	DefaultRing.getStartPoint()

Methods in org.deegree.geometry.standard.primitive that return types with arguments of type Point

Pair<Point,Point>	DefaultOrientableCurve.getBoundary()
Pair<Point,Point>	DefaultOrientableCurve.getBoundary()
Pair<Point,Point>	DefaultCurve.getBoundary()
Pair<Point,Point>	DefaultCurve.getBoundary()
Pair<Point,Point>	DefaultRing.getBoundary()
Pair<Point,Point>	DefaultRing.getBoundary()

Uses of Point in org.deegree.geometry.standard.surfacepatches

Methods in org.deegree.geometry.standard.surfacepatches that return Point

Point	DefaultRectangle.getPoint1()
Point	DefaultTriangle.getPoint1()
Point	DefaultRectangle.getPoint2()
Point	DefaultTriangle.getPoint2()
Point	DefaultRectangle.getPoint3()
Point	DefaultTriangle.getPoint3()
Point	DefaultRectangle.getPoint4()

Uses of Point in org.deegree.geometry.validation

Methods in org.deegree.geometry.validation with parameters of type Point

boolean	GeometryValidationEventHandler.curvePointDuplication(Curve curve, Point point, List<Object> affectedGeometryParticles) Called when a sequence of two identical control points in a Curve is detected.
boolean	GeometryValidationEventHandler.curveSelfIntersection(Curve curve, Point location, List<Object> affectedGeometryParticles) Called when a self-intersection of a Curve is detected.
boolean	GeometryValidationEventHandler.ringSelfIntersection(Ring ring, Point location, List<Object> affectedGeometryParticles) Called when a self-intersection of a Ring is detected.

Uses of Point in org.deegree.gml.geometry

Methods in org.deegree.gml.geometry that return Point

Point	GML2GeometryReader.parsePoint(XMLStreamReaderWrapper xmlStream)
Point	GML2GeometryReader.parsePoint(XMLStreamReaderWrapper xmlStream, ICRS defaultCRS)
Point	GML3GeometryReader.parsePoint(XMLStreamReaderWrapper xmlStream, ICRS defaultCRS) Returns the object representation of a (<gml:Point>) element.
Point	GML3GeometryReader.parsePointProperty(XMLStreamReaderWrapper xmlStream, ICRS defaultCRS) Returns the object representation of an element with type gml:PointPropertyType (such as gml:pointProperty).

Methods in org.deegree.gml.geometry with parameters of type Point

void	GML2GeometryWriter.exportPoint(Point point)
void	GMLGeometryWriter.exportPoint(Point point)
void	GML3GeometryWriter.exportPoint(Point point) Exporting a point via the XMLStreamWriter given when the class was constructed

Uses of Point in org.deegree.gml.geometry.validation

Methods in org.deegree.gml.geometry.validation with parameters of type Point

boolean	GMLValidationEventHandler.curvePointDuplication(Curve curve, Point point, List<Object> affectedGeometryParticles, List<GMLElementIdentifier> affectedElements) Called when a sequence of two identical control points in a Curve is detected.
boolean	GMLValidationEventHandler.curveSelfIntersection(Curve curve, Point location, List<Object> affectedGeometryParticles, List<GMLElementIdentifier> affectedElements) Called when a self-intersection of a Curve is detected.
boolean	GMLValidationEventHandler.ringSelfIntersection(Ring ring, Point location, List<Object> affectedGeometryParticles, List<GMLElementIdentifier> affectedElements) Called when a self-intersection of a Ring is detected.

Uses of Point in org.deegree.observation.model

Methods in org.deegree.observation.model that return Point

Point

Procedure.getLocation()

Constructors in org.deegree.observation.model with parameters of type Point

Procedure(String procedureHref, Point location, String featureOfInterestHref, String sensorId, String sensorName, URL sensorURL)

Uses of Point in org.deegree.protocol.ows

Methods in org.deegree.protocol.ows with parameters of type Point

static void

OWSCommonXMLAdapter.exportPositionType(XMLStreamWriter writer, Point pos) Exports a Point as a ows:PositionType.